| Features |
|
High wireless modem signals |
High-speed analogue V.90/V.92 and V34 modem signals with up to 56Kbit/s (minimum of 28.8Kbit/s). |
| Scalability |
Connection of up to 4 extension units to a single base unit. |
| |
Voice call priority over modem and fax calls – both for parallel telephone, telephone on extension and handset |
| Auto conference call |
Barge in (auto conference call) between handsets and the external line. |
| Compatible |
The base unit supports GAP handsets. Internal calls support for handset. |
| Registration of extra extension unit |
Registration of extra extension unit by easy cable connection between base and extension unit. |
| Standard |
| Interface |
1.8 GHz DECT air interface using DECT authentication and encryption. |
| PSTN interface – extension unit |
| Line voltage |
3 intervals from base unit to extension unit
• No line: <3V
• Parallel telephone off hook: 3V > voltage > 18V
• Idle line: >25V |
| Ringer signal |
25Hz ringer signal on extension unit.
Extension unit ringer signal (square wave) with >=50VRMS. |
| PSTN interface – base unit |
| Line interface |
European TBR 37/38 with DTMF and optional pulse dialling supported. |
| REN |
<0.1REN load from base on telephone line. |
| CLI support: |
|
Standard |
Bellcore 202, V.23 (EU) |
| Signal modes |
FSK DT-AS reception and generation.
FSK RP-AS reception and generation.
DTMF reception and generation in extension unit without pol-reversal. |
| Signal content |
Calling line identity (EN 300 659-3)
Calling party name (EN 300 659-3) |
|
Connectors: |
| Base station |
Two RJ11 plugs on base for connection to PSTN line and plug through to other PSTN services. |
| Extension unit |
One RJ11 plug for attachment to modem, fax or telephone. |
|
Mechanics: |
| Dimensions |
Size: 95x60x75mm. |
| Weight |
<100g. |
| Operating temperature |
10°–40°C – for indoor use only. |
| LED signalling |
MMI: 1 colour (green) LED on base and 3 colour (yellow, green and orange) LEDs on extension unit |
|
Powers: |
| Power supply |
230V +/- 10%. |
| Power consumption |
Idle mode: <1W. Active mode: <3.1W. Active mode ringing: <3.1W. |
|
Approvals: |
| Safety |
• IEC 60695-2-11 (Glow Wire). • IEC 60950 (CE). |
| DECT |
• TBR 10. • TBR 37. • TBR 38. • TBR 6. • EN 300 444 – GAP. |
| EMC |
• EN55022. • IEC 61000-4 and 64000-3. • IEC 1000-4 (over voltage and current). |
| Environmental |
• RoHS and WEEE. • IEC 60068. |
